remote-support

ADSL2 Modem modem/router settings for common Australian providers: (UNDER REVIEW USE WITH CARE)

Telstra Business Broadband ADSL2:
Username      This email address is being protected from spambots. You need JavaScript enabled to view it.
 Password    [as provided]
 VPI/VCI    8/35
Protocol/Encapsulation    PPPoA/VC Mux (PPPOE/LLC should work also)
Authentication method   CHAP
MTU   Default (or 1492) (note some information says 1500)
Dynamic/static IP   Dynamic (This a prefrence on my part not a requirment, it should receive the same "static" IP automaticly each time you could set it for a static IP as provided by the ISP)
WAN IP   Blank (dynamic)
Primary DNS   139.130.4.4
Secondary DNS   203.50.2.71
Telstra Business FTTN NBN:
Username      This email address is being protected from spambots. You need JavaScript enabled to view it.
 Password    [as provided]
 VPI/VCI    TBA
     
Exetel FTTN NBN:
Username      TBA
 Password    [as provided]
 VPI/VCI    TBA
     
More to follow...

This blog post has been provided for the benefit of digitalwelcomemat IT customers.
Treat this information as informative only and do not take actions or make decisions on the basis of the information contained here. All IT decisions and actions should be made after consultation with your chosen IT professional taking into account all the of the relevant factors.

Welcome:

digitalwelcomemat now has a blog!

Subscribe for the news as it happens, call me for support on 0404 493 770 or access my remote support solution here: http://help.digitalwelcomemat.com/

Digitalwelcomemat provides IT consultancy and services for business customers on the NSW Central Coast in Australia.

Search

Articles

Contact:

Give me a call: 0404 493770

Go to top